Wiedemann tamper station v2 short, stainless steelSolid place to tamp, instead of on the counter edge. Reduces movement and protects the wrists during a shift.

The beans sit in the hopper, ground on demand. This is the faster way when the same variety is always running.
The diameter of the grinding burrs determines how many revolutions are needed for the same amount of coffee.
Flat burrs grind with two parallel rings and deliver a tight particle size distribution.
You decide how long to grind.
A large hopper means less frequent refilling.
A large hopper means less frequent refilling.
The beans sit in the hopper and are ground on demand.
The grinder output indicates how much ground coffee comes out per second.
The numbers from the data sheet, in the order that matters. A faster grinder does not grind better, it only grinds more.
The larger the burrs, the fewer revolutions are needed for the same amount of coffee. The grounds heat up less, and heat in the ground coffee costs aroma. Installed are flat hardened steel.
For 18 g of coffee, calculated from 6 g per second. For a single drink you hardly notice it: brewing and milk foam take longer than grinding. For 50 drinks during peak time that is about 4 minutes less grinding time than the mid-range of our assortment.
These are 690 square centimeters of counter that are permanently occupied. At 57 cm height you need space above it for refilling.
All values come from the data sheet of this device. If a specification is missing, it is not listed here.
The same values by which you filter and compare in the shop. Is something missing? Write to us, we'll add it.
The beans sit in the hopper and are ground on demand. This is the faster way in everyday life, especially if the same coffee is used all the time. A full hopper, however, means that the beans at the bottom are exposed to the air for longer.
The diameter of the grinding burrs determines how many revolutions are needed for the same amount of coffee. Larger burrs need fewer revolutions, the grind warms up less, and heat in the grind reduces aroma.
Flat burrs grind with two parallel rings and deliver a tight particle size distribution. You do not recognize dull burrs by appearance but by the fact that the shot runs faster than usual.
You decide how long to grind. The most reliable way is with a scale because otherwise the amount shifts with grind size and bean.
A large hopper means less frequent refilling. Bear in mind that beans age in it: anything that stays in the hopper for longer than a few days loses aroma, no matter how good the grinder is.
The grinder output indicates how much ground coffee comes out per second. For a single drink you hardly notice it, as extraction and milk determine the time. You only feel it when many drinks are made back to back.
A large hopper means less frequent refilling. Bear in mind that beans age in it: anything that stays in the hopper for longer than a few days loses aroma, no matter how good the grinder is.
Manufacturer: Eureka · EUREKA, Conti Valerio S.r.l., Via Luigi Longo 39/41, 50019 Sesto Fiorentino (FI), Italy, www.eureka.co.it/en, [email protected]
Wiedemann tamper station v2 short, stainless steelSolid place to tamp, instead of on the counter edge. Reduces movement and protects the wrists during a shift.
IPM Brew Drawer Maxi De LuxeRuns all day in commercial use. The Maxi holds more and is quieter than a household box.
Eureka Digital Scale Precisa digital scale (with Bluetooth)Without scale dosing at the grinder, a scale is the only way to keep the dose constant.
Organic and Demeter espresso from our own roastery as a monthly subscription. You set the quantity, we deliver weekly or every two weeks free to your door. Roasts can be changed monthly, the subscription can be paused, and there is no minimum term.
6 kg / month
Around 750 espressos a month, 170 a week, 25 a day based on 8 g per shot
Price per kg: CHF 29.70−10 % instead of CHF 33.00 per kg without a subscription
CHF 178.20
per month, excluding VAT
CHF 190.67 including 7 % VAT
Delivery rhythm: every two weeks
12 kg / month
Around 1500 espressos a month, 340 a week, 50 a day based on 8 g per shot
Price per kg: CHF 28.05−15 % instead of CHF 33.00 per kg without a subscription
CHF 336.60
per month, excluding VAT
CHF 360.16 including 7 % VAT
Delivery rhythm: weekly
24 kg / month
Around 3000 espressos a month, 690 a week, 100 a day based on 8 g per shot
Price per kg: CHF 26.40−20 % instead of CHF 33.00 per kg without a subscription
CHF 633.60
per month, excluding VAT
CHF 677.95 including 7 % VAT
Delivery rhythm: weekly
Prices exclude VAT, plus 7 % VAT, base price = price per kilogram. More than 24 kg per month? Then we calculate individually. Request a quote
You write to us, not the manufacturer. We organize pickup, repair and return shipping.
Seals, shower screens, pumps in stock. Maintenance service recommended after two years.
* Creditworthiness required. Installment example PayPal Installments: effective annual interest rate 12,49 % p. a., fixed nominal interest rate 11,80 % p. a., term 24 months. PayPal shows terms and total costs in the next step. Only for customers resident in Germany.
The Eureka SG85 Grocery coffee grinder is suitable for preparing filter coffee at the counter. It features 85 mm grinding discs and a stepless, micrometric adjustment. Due to its performance, it grinds large quantities of coffee precisely and evenly, which is particularly advantageous in professional use.
Eureka incorporates Silent Technology in many grinders, the Mignon Silenzio is at 51 dB, about 20 dB quieter than conventional grinders. The SG85 likely has a similar anti-vibration design, but there is no officially verified dB rating in the data. A 510 W motor at 1,350 rpm is audible but dampened. Comparison: Mahlkönig EK43 is about 75 to 80 dB, Mazzer Super Jolly is at 85 dB. If your café has an open kitchen or you work alone in the morning, the SG85 is suitable for the environment. For absolute quiet: Mignon Zero 55S (51 dB verified). For the shop counter: SG85 is quiet enough.
Since June 2025 Eureka has REPA as global master distributor for spare parts, which supplies specialist retailers, service technicians and end customers directly. Grinding discs, switches, gaskets and motor components are in stock. Delivery time from German dealers is usually 2 to 5 working days. The SG85 uses standard Eureka assemblies, no exotic parts. Tip: Keep critical parts such as the microswitch or the chute flap as backups; they cost little and can save you downtime in an emergency.
The SG85 features 85 mm hardened steel grinding discs, an ACE system, and stepless grind size adjustment. Dimensions: 23 cm width, 29.5 cm depth, 57 cm height. Specific motor power, voltage, and grinding performance in g/s are currently not available; you can request details from the manufacturer Eureka. Comparable Atlas-85 models deliver 7–8.5 g/s at 510 W.
We negotiate volume discounts individually, depending on order quantity and delivery frequency. For Eureka grinders we usually start at 10 units per quarter; for the SG85 as a shop grinder it can already be worthwhile from 5 units. Send us your demand forecast and we will calculate specifically.
The SG85 is designed for professional in-store use; CE conformity is standard. Specific certificates such as NSF, UL or ISO evidence are not available to us. Eureka does not publish these documents for comparable models like the Atlas series; if required for tenders you must request the documents directly from Eureka.
Currently, we do not have confirmed information from the source regarding the SG85 grinders and their compatibility with existing Eureka grinders. Please check directly with the manufacturer or service partner which grinding discs are suitable for your models.
Write to us if you are unsure about the selection. We roast ourselves and drink what we sell.